Mitsubishi Evolution 9 Plug Seal

Mitsubishi Evolution 1 to 9 is actually all using the 4G63 series of engine, although each series there may have changes on some area like on the intake manifold side, cylinder head side or even in the rocker cover side, but the 4pcs of plug seals on the rocker cover is actually never change from the Evo 1 to 8, only in the Evo 9 the plug seal have some minor changes on their design, and that is the size or thickness of the rubber that attached to the small hole which have minor modification that differentiate them.

Subaru EJ20 Rocker Cover Gasket Type

In this post, I would like to pair up those Subaru EJ20 series rocker cover gasket so that customer can refer the photo on this post to check out which rocker cover gasket they use on their Subaru EJ20 engine. The above is consider the first version of EJ20 engine, which the KP Part number is KE70830 and KE70834 respectively.

The above type is one of the EJ20 series that use 2pcs of same rocker cover gasket which carry KP Part number of KE70817.

The above pair is under KP Part number KE70831 and KE70832.

The above type is another version that using 2pcs same type of rocker cover gasket which carry KP Part number KE70840.

The above pair is under KP Part number KE70858 and KE70855.

The above pair is under KP Part number KE70868 and KE70869.

The above pair some may call it AVCS type of rocker cover gasket which carry KP Part number of KE708108 and KE708109.

Suzuki Kizashi J24B Rocker Cover Gasket

Suzuki Kizashi 2.4 model is using the J24B engine, which may consider the same family of engine of J20A engine which can be found in the Grand Vitara 2.0.

But the rocker cover gasket have a different type of design if compare both J24B and J20A engine, for the J20A engine rocker cover gasket, the 4pcs plug seal and the moon seal is separate from the main rocker cover gasket, while the J24B type of rocker cover gasket the plug seal and moon seal is already attached on the rocker cover gasket itself.

Ford Focus III Rocker Cover Gasket

Ford Focus III Rocker Cover have some similarity with the Mazda LF, L5 type of rocker cover, the design seem to be concluded as the same family of engine between those in Mazda 6, but you can find that on the above photo, it have an extra groove at the bottom right part of the rocker cover.

And we extract the photo of the rocker cover gasket from the Avito website, you can find that the rocker cover gasket have the extra 2 round seal like the oil seal in the gasket set, which it can't be found in the Japan Mazda model.

Type of Suzuki K6A Rocker Cover

This post let us have a look on various different rocker cover on Suzuki K6A engine model.

Suzuki K6A Rocker Cover with 1 moon seal and 3 plug seals

Suzuki K6A Rocker Cover, with gasket have 2 moon seal and 3 plug seals

Suzuki K6A Rocker Cover, with 2 moon seals and plug seal stick with the gasket

Suzuki K6A Rocker Cover with 3 plug seals, and the curve design at the other end

Nissan A15 Engine Oil Pan Gasket

The old Nissan A15 engine, which commonly use on Nissan Vanette C20 and C22 van in Malaysia market, have 2 types of oil pan gasket, from the photo, the right hand side is for the Vanette van model, for the left hand side, which you found the oil pan may be longer when compare to the Vanette type, is use on the YP model forklift, it seem this oil pan gasket only apply for Forklift model only.

Toyota Levin 20V 4AGE Manifold Gasket

Today let's take a look on the Toyota Levin 20V 4AGE engine manifold gasket, although some may say they have differentiate by black top rocker cover or silver top rocker or may call it as 4 throttles, basically their manifold gasket consider a bit special when compare to other Toyota engine.

Have a look on the top diagram on the engine manifold  and look at the second photo for their 3 manifold gasket inside a gasket kit.

The exhaust manifold gasket still consider a normal metal type of gasket design, with the design very similar to the Toyota Levin 16V which only differentiate by both left end and right end hole position.

And for this intake manifold gasket, it seems like make by the thick fibre material with metal gasket sheet on it, due to its original thickness, if one is buying the paper type of gasket, may be they need to re-use the thick fibre body.

The another layer of the intake manifold have this type of design, I'm not really know what is the technical purpose at this area, but they have the gasket with rubber seal attached in the inner hole.