Friday, July 22, 2011

Mazda BP-ZE Engine Gasket


In Malaysia market, Mazda BP-ZE engine can be found in model such as Mazda Lantis 1.8, Mazda TX3 1.8 DOHC, and Ford Lynx 1.8 which some may call 323 Laser 1.8 DOHC.

Let see what other country calling with this range of engine,

Mazda BP series of engine

The 1.8 L (1,839 cc) BP is a dual-overhead variant of the B8. It was first found in the 1989 Mazda Familia and American-market 1990 Mazda Protege LX. This engine was dubbed BP-ZE and featured a forged crankshaft, piston oil squirters, a structural aluminum oil pan with cooling fins, a 7,000 rpm redline, and the Variable Inertia Charging System (VICS). This particular variant can be found in the following vehicles:

1989-1994 Mazda Familia GT (European & Australian Market)
1989-1994 Ford Laser TX3 (Australian Market)
1990-1994 Mazda Protege LX (with VICS)
1995-1998 Mazda Protege ES (Australian Market: 1994-1998 323 Protege SE)
1990 Mazda Infini
1990-1991 and 1993 Mazda Protege GT (Canadian Market)
1990-1993 Mazda 323 (European Market)
1991-1996 Ford Escort GT and LX-E
1991-1996 Mercury Tracer LTS
1995-1997 Kia Sephia RS, LS, GS
1994-1998 Mazda Familia (Japanese Market)
1994-1997 Mazda MX-5/Miata (did not have VICS until 1999)
There is also a non-performance version that is most easily recognized by its black stamped-steel oil pan. It also features a cast crankshaft, no oil squirters, a plastic oil pickup tube and less aggressive camshafts. It is found in the 1995-1998 Mazda Protege ES.

Sunday, July 17, 2011

Suzuki K6A Engine Gasket


In my earlier post, I did mention on the K6A engine that is install on Japan Suzuki Alto (Please note that the Malaysia Suzuki Alto which is assemble from India Suzuki factory is in difference engine), as it seem like this engine is mainly for Japan domestic market requirement only, I'm not really expect to find such an engine in Malaysia.

Than I found a post in a local auto forum, that one guy had swap this 2003 Suzuki Alto K6A engine to 1993 Suzuki Alto, which it originaly carry F6A engine.


And also some fact of K6A engine driven Suzuki Cappuccino.

The Suzuki Cappuccino is a small 2-door, 2-seater demountable hardtop roadster produced by Suzuki Motor Corporation. The vehicle was designed to meet Kei car specifications for lower tax and insurance in Japan. Weighing just 725 kg (1,598 lb), the Cappuccino is powered by a turbocharged, three-cylinder, 657cc DOHC engine (just under the 660cc maximum displacement allowed for a Kei car). Its dimensions also conformed to Kei car regulations on length and width, being 3,295 mm (129.7 in) long and 1,395 mm (54.9 in) wide.

Front-rear weight distribution is claimed to be 50/50% when both seats are occupied. Layout is front mid-engined and rear-wheel drive. The hood, roof, roll bar and lower front guard panels are aluminium.

Three removable roof panels mean that the car can be used as a closed coupé; T-top; targa; or, on retraction of the rear window and roll bar, a full convertible. Roof panels stow in the trunk (though it must be said that they will occupy 90 percent of the already modest space), and the rear window/rollcage assembly retracts into the body behind the seats. Unlike many convertibles of the time, the rear window is glass and wraparound, with demisting elements.

It was originally equipped with the F6A engine: later models were fitted with a K6A engine which was lighter and had chain-driven, rather than belt-driven camshafts and more torque. Both are DOHC 12-valve, inline 3-cylinder engines that were turbocharged and intercooled. Power output was a claimed 63 hp (47 kW; 64 PS) @ 6500 rpm to fit under the maximum power allowed for Kei cars.

The Cappuccino featured 4-wheel disc brakes and rear wheel drive. Later versions in Japan had an early production iteration of speed-sensing electric power-assisted steering and aluminium double wishbone suspension. Production began in 1991 and ceased in 1997. The Cappuccino's closest competitor of the time were the Autozam AZ-1, Honda Beat and the Daihatsu Leeza Spyder. (The Autozam AZ-1, Honda Beat and Suzuki Cappuccino were together called the Sporty K-Car's ABC.)

Friday, July 8, 2011

CUMMINS 4BT TRACTOR ENGINE GASKET




Not in my product range, but sourcing for customer as an extra services is what we had been done, I'm not really know about tractor like Cummins 4BT, so just copy some fact from wikipedia as below.



The Cummins B Series is a family of straight-four and straight-6 diesel truck and industrial piston engines manufactured by Cummins. The B Series is known for displacing "one liter per cylinder" because of the popular 3.9 litres (238.0 cu in) straight-four and 5.9 litres (360.0 cu in) straight-six. A 3.3 litres (201.4 cu in) straight-four is also available. The B Series is widely used in many segments, including pickup trucks (the Dodge Ram), buses, military vehicles, construction equipment, and marine. Some of the construction and marine applications have actually featured two B series Cummins engines.

The engine was originally designed by Cummins and Case Corporation for commercial truck applications, and appeared in a light-duty truck, the Dodge Ram, in 1989. This was not the first engine to appear in Dodges as a Diesel option. Mid-1970s D models offered the rare, underpowered, Mitsubishi non-turbo diesel.

Every Cummins powered Dodge Pickup (since initial production in 1989) has come equipped with a turbocharger. It uses a gear-drive camshaft for extra reliability. Also specified is a deep-skirt engine block and extremely strong connecting rods. A Holset turbocharger is used. The original B Series was updated with 24 valves and an electronic engine management system to become the ISB in 1998.

The 3.9L/4BT Cummins is an engine in the same family as the 5.9 litres (360.0 cu in) Cummins turbodiesels. The 3.9L/4B is an inline four cylinder turbodiesel that was popular for many step van applications, including bread vans and other commercial vehicles. This engine is also used in various industrial, construction and agricultural applications. With a cylinder bore of 4.02 inches (102.1 mm) and a piston stroke of 4.72 inches (119.9 mm), the engine had a wet weight of 745 pounds (338 kg). In recent years it produced 130 horsepower (97 kW; 132 PS) and 355 pound-feet (481 N·m) of torque. The 4BT today is also popular as a conversion engine among many light-duty pickup trucks that were originally equipped with gasoline engines. This is due to its high fuel efficiency while producing power comparable to the original light-duty gasoline engine. The 4BT engines have the same pistons, connecting rods, valvetrain components, and injectors as their 6BT counterparts.

Friday, July 1, 2011

Mitsubishi MIVEC engine moon seal


Mitsubishi MIVEC engine which in 4G92, 4G93 or 6A13 may found the moon seal which have 2 of them attached together, anyone can comment the difference of using the 2 moon seal which is attached together or using just the 2 moon seal separately?

MYVI 1.3 O RING CONTENT IN GASKET SET


Normally in an engine gasket set, we normally stress on Cylinder Head Gasket, Rocker Cover Gasket, Intake and Exhaust Manifold Gasket and Valve Seal, some will extend to Plug Seal and Valve Cover Seal.

Anyway with the newer generation of engine, you may see the need of include some of the O-ring into the gasket set, like Timing Chain O-ring, fuel injector O-ring, throttle body O-ring, oil filter bracket O-ring and etc.

Since Perodua Myvi 1.3 is currently one of the most popular vehicle in Malaysia, and the engine is similar for those Toyota Avanza, Kembara DVVT, and some modification engine to K3-VET turbo, just show a photo with some O-ring in this type of engine in this post.

Thursday, June 23, 2011

Toyota Tercel Engine


For the Toyota E series of engine, the history can trace to their 1E or 2E Starlet model, than the 3E and 4E Corolla with latest 5E of Sera, Cynos, Tercel and Paseo.

Only the 5E series of engine is using metal cylinder head gasket while other using either graphite or silicone type of material, still there are 4E engine that install with turbo, wish to install the metal cylinder head gasket on it.

The original 5E metal cylinder head gasket thickness may be only 0.25mm but the 4E graphite cylinder head gasket have a thickness around 1.0mm, so would this thickness cause any efficiency on the engine performance?

Tuesday, June 14, 2011

Ford 2.0L EcoBoost engine to debut in Malaysia in Ford S-MAX MPV and Ford Mondeo Titanium


An article from http://www.paultan.org/ to share for,

The age of economy may be upon us, but being frugal with fuel doesn’t mean that there should be any sacrifice in power output delivery, certainly not when you can have the best of both worlds. Today’s engines deliver more, for less, with a bit of help from technology.

These days, the likes of turbocharging and direct-injection offer a smaller engine the performance equal to a larger displacement one – it’s not surprising to see a 2.0 litre DI turbocharged four-cylinder mill more than matching the power output and torque of a normally-aspirated V6, and the numbers add up in performance too.

Ford’s version of this is called EcoBoost. First seen on its 3.5 litre EcoBoost V6 engines, turbocharging and direct fuel injection are the two main items at the heart of EcoBoost’s workings. The turbocharger increases airflow in the engine to boost power and direct injection helps enable more efficient fuel burn for better fuel economy.

How a turbocharger works, if you didn’t already know, is by recovering energy from the exhaust that otherwise would be wasted and putting it back in the engine to gain efficiency. Simply put, the turbocharging system puts more air into the engine, creating more power. A compressor increases or boosts the pressure of the air entering the engine, and an air-to-air intercooler reduces the air temperature before it enters the engine.

Meanwhile, direct injection uses high-pressure fuel injectors to spray a fine mist of fuel directly into each cylinder – the fine mist generated by each solenoid-controlled Bosch injector’s tiny outlet holes helps to create a well-mixed air-fuel mixture, and also cools the incoming air, helping to reduce the potential for engine knock. Unlike port-fuel-injection (PFI) engines that spray fuel in the intake system, the direct injection system puts the fuel exactly where it needs to be for combustion.

A high-pressure injector is positioned to the side of each cylinder, aiming the fuel directly into the cylinder adjacent to a high-intensity spark plug and alongside the intake and exhaust valves.

Fuel from the vehicle tank is pumped at normal pressure to the engine compartment, where a special, cam-driven, high-pressure fuel pump increases the fuel pressure – the fuel is then sprayed into the cylinders at pressures of up to 2,200 pounds per square inch (PSI), which is about 35 times more intense than PFI injection. Electronic control system varies the timing and intensity of the fuel delivery, according to engine operating conditions.

This precisely controlled fuel delivery improves the engine’s transient response, contributes to improved fuel economy and enables improved emissions, particularly at cold start, and an EcoBoost engine can reduce CO2 emissions by 15% and improve fuel efficiency by 20%.

The 2.0 litre EcoBoost I-4 four-cylinder engine, which will debut in the upcoming Ford Mondeo Titanium and S-Max models due to arrive in Malaysia soon, employs many of the basic principles of the first generation EcoBoost engines.

Combining a single turbocharger with a direct injection fuel delivery system, the high-pressure fuel pump – which is a cam-driven mechanical pump with a single piston and an electronic control valve – on this mill operates at 2,200 psi, more than 50 times the norm as seen in a conventional NA four-cylinder engine.

Elsewhere, the turbocharger – which is paired with the direct-injection system to virtually eliminate turbo lag – spins at up to 200,000 rpm and is designed for a life cycle of 150,000 miles or 10 years. It spools up quickly to maximum torque and maintains it across a broad range, estimated from 2,000 rpm to 5,500 rpm according to the company.

The 2.0 litre EcoBoost I-4 engine also adds Ti-VCT (Twin Independent Variable Camshaft Timing) technology, as seen in the Fiesta.

Working on a ‘More Power, Less Fuel’ tagline, the EcoBoost engine promises to deliver power and performance in a smaller, more efficient package, with lower emissions. No surprise to find then that Ford is targetting to offer the EcoBoost engine – in various displacements – in up to 80% of its vehicle nameplates and aim for global sales of 1.5 million EcoBoost-powered vehicles per year in the near future .

You can find out more about EcoBoost at ecoboost.com.my, a microsite that features explanations on the unique engine technology through detailed articles and video clips. In addition, the website will give consumers an opportunity to sign up and get invited to exclusive test drive sessions.